Your cart is empty

XAC A891 Pendant Remote Control

XAC A891 Pendant Remote Control

schneider electric: XAC-A891

XAC-A891 telemecanique Pendant Remote Control.

Range of product Harmony XAC
Product or component type Pendant control station
Control station name XACA
Control station type Double insulated
Enclosure material Polypropylene
Electrical circuit type Control circuit
Enclosure type Complete ready for use
Control station application Control of single speed hoist motor
Control station composition 8 pushbuttons
Control button type Eighth pusbutton 1 NC O
Fifth pushbutton 1 NO forward slow
First pushbutton 1 NO raise, slow
Fourth pushbutton 1 NO left, slow
Second pushbutton 1 NO lower, slow
Seventh pushbutton 1 NO I
Sixth pushbutton 1 NO reverse, slow
Third pushbutton 1 NO right, slow
Contact block name ZB2BE101 for each direction (except eighth)
ZB2BE102 for eighth direction
Mechanical interlocking With mechanical interlocking between pairs

 
Complementary

Control station colour Yellow
Connections - terminals Screw clamp terminals , connection capacity: 1 x 0.5...1 x 2.5 mm² without cable end
Screw clamp terminals , connection capacity: 1 x 0.5...2 x 1.5 mm² with cable end
Mechanical durability 1000000 cycles
Cable entry Rubber sleeve with stepped entry , cable outer diameter: 8...26 mm
Contact code designation A600 AC-15 , Ue = 600 V , Ie = 1.2 A conforming to IEC 60947-5-1 appendix A
A600 AC-15 , Ue = 240 V , Ie = 3 A conforming to IEC 60947-5-1 appendix A
Q600 DC-13 , Ue = 600 V , Ie = 0.1 A conforming to IEC 60947-5-1 appendix A
Q600 DC-13 , Ue = 250 V , Ie = 0.27 A conforming to IEC 60947-5-1 appendix A
[Ithe] conventional enclosed thermal current 10 A
[Ui] rated insulation voltage 600 V , degree of pollution 3
[Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947-1
Contacts operation Slow-break
Resistance across terminals ≤ 25 MOhm
Operating force 8 N for eighth pushbutton
10 N for pushbutton
Short circuit protection 10 A fuse protection by cartridge fuse type gG
Rated operational power in W 40 W DC-13 1000000 cycles , operating rate = 60 cyc/mn at 120 V , load factor = 0.5 load factor, load inductive conforming to IEC 60947-5-1 appendix C
48 W DC-13 1000000 cycles , operating rate = 60 cyc/mn at 48 V , load factor = 0.5 load factor, load inductive conforming to IEC 60947-5-1 appendix C
65 W DC-13 1000000 cycles , operating rate = 60 cyc/mn at 24 V , load factor = 0.5 load factor, load inductive conforming to IEC 60947-5-1 appendix C
Terminal identifier (11-12)NC
(13-14)NO
Product weight 0.94 kg

 
Environment

Standards CSA C22-2 No 14
EN/IEC 60204-32
EN/IEC 60947-5-1
UL 508
Product certifications CCC
GOST
Protective treatment TH
Ambient air temperature for operation -25...70 °C
Ambient air temperature for storage -40...70 °C
Vibration resistance 15 gn (f = 10...500 Hz) conforming to IEC 60068-2-6
Shock resistance 100 gn conforming to IEC 60068-2-27
Class of protection against electric shock Class II conforming to IEC 61140
IP degree of protection IP65 conforming to IEC 60529
IK degree of protection IK08 conforming to EN 50102
RoHS EUR conformity date 2Q2009
RoHS EUR status Will be compliant

Type BW Standard Duty Pendant Stations

The Square D type BW pendant station is a pre-assembled, 2 button station well suited for standard hoist applications. Oversized finger grips on the rear of the enclosure make it easy to grip and operate.

  • Made of high impact thermoplastic with self-extinguishing flammability rating (UL 94V-O
  • NEMA 1, 3, 3R, 4, 4X and 13 water-tight, dust-tight, oil-tight and corrosion resistant
  • UL listed, CSA approved, carries CE marking 

 




还考虑什么? 现在就装一个吧!